Brighton White Shaker

Width 96" | Height 36" | Depth 1/4"

Finished panel on both sides. Commonly used to finish the back of an island. Outside corner molding would be needed to finish the edges.

Width 96" | Height 36" | Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 96" |Height 48" |Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 96" | Height 3-1/4"

Angled crown molding. This crown will not have any 'heel' to attach the crown to the top of cabinetry, so it's better suited when attaching directly to the wall or ceiling. When being used on the top of wall cabinets, the Angled Crown Molding (ACM8-S) will work better since it does have a 'heel' on the bottom of the crown.

Width 96" | Height 3-1/4"

Angled crown molding. Crown will have a 'heel' attached to the base to attach to the top of wall cabinets. If installing crown directly to the wall or the ceiling, the Angled Crown Molding (CM8-S) will work better since it does not have the 'heel'.

Width 96" | Height 2-1/4" | Depth 3/4"

Beveled edge molding commonly used to add to crown molding or use as light rail molding.

Width 96" | Height 2-1/2"

Cove crown molding. This crown will not have any 'heel' to attach the crown to the top of cabinetry, so it's better suited when attaching directly to the wall or ceiling. When being used on the top of wall cabinets, the Cove Crown Molding (ACM8-C) will work better since it does have a 'heel' on the bottom of the crown.

Width 96" | Height 2-1/2"

Cove crown molding. Crown will have a 'heel' attached to the base to attach to the top of wall cabinets. If installing crown directly to the wall or the ceiling, the Angled Crown Molding (CM8-C) will work better since it does not have the 'heel'.

Width 96" | Height 1-1/2" | Depth 2"

Light rail molding that is commonly used to hide lighting under wall cabinets.

Width 96" | Height 3/4" | Depth 3/4"

Outside corner molding. Commonly used to finish edges on islands or other areas.

Width 96" | Height 3/4" | Depth 3/4"

Quarter round molding.

Width 96" | Height 4-1/2" | Depth 1/4"

Toe kick molding.

Width 96" |Height 24" |Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.