Charlotte Grey

Width 1.5" | Height 96" | Depth .75"

Tall filler.

Width 11.75" | Height 17.5" | Depth .75"

Wall decorative end panel.

Width 11.75" | Height 29.5" | Depth .75"

Wall decorative end panel for the side of a 30" high and 12" deep wall cabinet, or order (2) for the top of an 84" cabinet or panel.

Width 11.75" | Height 35.5" | Depth .75"

Wall decorative end panel for the side of a 36" high and 12" deep wall cabinet, or order (2) for the top of an 90" cabinet or panel.

Width 11.75" | Height 41.5" | Depth .75"

Wall decorative end panel for the side of a 42" high and 12" deep wall cabinet, or order (2) for the top of an 96" cabinet or panel.

Width 11.75" | Height 49" | Depth .75"

Decorative door for the lower portion of a tall cabinet or panel (pantry, oven cabinet, refrigerator panel). A quantity of (2) would need to be purchased to cover the full 24" depth. Then, (2) smaller decorative wall panels (D1230, D1236 or D1242) would need to be purchased for the top part of the cabinet or panel. (2) 12x30 panels would be used for an 84" high application, (2) 12x36 for a 90" high application, and (2) 12x42 for a 96" high application.

Width 14.75" | Height 29.5" | Depth .75"

Wall decorative end panel.

Width 17.75" | Height 29.5" | Depth .75"

Wall decorative end panel.

Width 20.75" | Height 29.5" | Depth .75"

Vanity decorative end panel for the side of a 21" deep vanity base cabinet.

Width 23.75" | Height 29.25" | Depth .75"

Base decorative door for the side of 24" deep base cabinet. **The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims can be used on the opposite side so it's level.**

Width 23.75" | Height 17.5" | Depth .75"

Wall decorative end panel.

Width 3" | Height 34.5" | Depth .75"

Base filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 3" | Height 30" | Depth .75"

Wall filler.

Width 3" | Height 36" | Depth .75"

Wall filler.

Width 3" | Height 42" | Depth .75"

Wall filler.

Width 3" | Height 96" | Depth .75"

Fluted filler that can be trimmed as needed.

Width 3" | Height 96" | Depth .75"

Tall filler.

Width 30" | Height 5.5" | Depth .75"

Shaker valance that can be trimmed up to 3-15/16" on each end.

Width 36" | Height 5" | Depth .75"

Arched valance that can be trimmed up to 1-1/2" on each end.

Width 36" | Height 5.5" | Depth .75"

Shaker valance that can be trimmed up to 3-15/16" on each end.

Width 36" | Height 12" | Depth .75"

Raised panel door valance.

Width 42" | Height 5" | Depth .75"

Arched valance that can be trimmed up to 5" on each side.

Width 42" | Height 5.5" | Depth .75"

Shaker valance that can be trimmed up to 3-15/16" on each end.

Width 42" | Height 12" | Depth .75"

Raised panel door valance.

Width 48" | Height 5" | Depth .75"

Arched valance that can be trimmed up to 5" on each side.

Width 48" | Height 5.5" | Depth .75"

Shaker valance that can be trimmed up to 3-15/16" on each end.

Width 48" | Height 12" | Depth .75"

Raised panel door valance.

Width 6" | Height 34.5" | Depth .75"

Base filler. Commonly used to fill gaps between cabinets and gaps between cabinets and appliances.

Width 6" | Height 30" | Depth .75"

Wall filler.

Width 6" | Height 36" | Depth .75"

Wall filler.

Width 6" | Height 42" | Depth .75"

Wall filler.

Width 6" | Height 96" | Depth .75"

Tall filler.

Width 60" | Height 5" | Depth .75"

Arched valance that can be trimmed up to 5" on each side.

Width 60" | Height 5.5" | Depth .75"

Shaker valance that can be trimmed up to 3-15/16" on each end.

Width 60" | Height 12" | Depth .75"

Raised panel door valance.

Width 72" | Height 5.5" | Depth .75"

Shaker valance that can be trimmed up to 3-15/16" on each end.

Width 96" |Height 24" |Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 96" | Height 36" | Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 96" |Height 48" |Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 96" | Height 2.25" | Depth .75"

Beveled edge molding commonly used to add to crown molding or use as light rail molding.

Width 96" | Height .75" | Depth .75"

Inside corner molding

Width 96" | Height 2" | Depth .75"

Mirror molding to be used to frame out a custom mirror. The mirrored glass would need to be purchased separetely.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Commonly used to finish edges on islands or other areas.

Width 96" | Height .75" | Depth .75"

Quarter round molding.

Width 96" | Height 1.5" | Depth .75"

Square chair rail molding.