Heather Grey Shaker Pre-Assembled Kitchen Cabinets

Heather Grey Shaker 48x96 Finished Back Panel
SKU# FBP489614-1-AN-Assembled

Width 96" | Height 48" | Depth 0.25"
Finished back panel. Commonly used to finish the back of an island.

$478.88

Qty
Heather Grey Shaker 96" Crown Molding
SKU# CM96-AN-Assembled

Width 96" Height 2.5" Depth .78125"
Crown molding that comes in an 8 foot strip. Commonly used to finish the top of wall cabinets. Once installed, the crown will stick out about 1-5/8" from the cabinet and the height off the cabinet will be about 1-7/8".

$191.03

Qty
Heather Grey Shaker Cove Crown Molding
SKU# CM96K-4-AN-Assembled

Width 96" | Height 4" | Depth .75"
Crown molding with large cove detail. Installed height will be 3" and installed depth will be 2-3/4" (how far it will extend from the cabinet).

$358.92

Qty
Heather Grey Shaker Crown Molding
SKU# CM96H-4-AN-ASSEMBLED

Width 96" | Height 4" | Depth .75"
Crown molding. Installed height will be 3 1/8" and installed depth will be 2 5/8" (how far out it will extend from the cabinet).

$300.90

Qty

Shipping Time:	Shipped in 5-15 business days
Style:	Shaker
Face Frame:	3/4" Eucalyptus Grandis
Door Frame:	3/4" Eucalyptus Grandis
Door Center:	Eucalyptus Grandis Veneer on MDF/HDF (to avoid cracking/warping)
Door Frame Width:	3"
Center Panel Beveled Edge:	No
Sides:	1/2" A-Grade plywood with wood veneer
Top & Bottom (Wall):	1/2" A-Grade plywood with wood veneer
Bottom (Base):	3/8" A-Grade plywood with wood veneer
Back Panel:	Wall Cabinets: 1/2" Picture Frame Recess Style, Base Cabinets: 1/2" Full Back
Shelves:	3/4 " A-Grade plywood with wood veneer
Base Cabinet Shelf Depth:	1/2
Drawer Front:	5-pc recessed panel
Drawer Box:	Solid Wood 17mm (close to 3/4") sides, Drawer bottom 1/2" plywood, Drawer length 21". Dovetail construction, Natural finish.
Drawer Glides:	Undermount, full extension with soft closing feature
Base Corner Supports:	Wood corner brackets with wood I-beam construction
Overlay:	Full with Butt doors
Hinges:	Concealed 6-way adjustable with Soft Closing Feature
Cabinet Interior:	Matches door finish
Center Stile:	No center stile on cabinetry 24"W to 36"W
Assembly Method:	Steel Clip
Finish:	Waterborne UV finish by Sherwin-Williams
Toe Kick:	1/2" Plywood (sides of the toe kicks will be unfinished)
Installation Rail:	1/2" Plywood
KCMA Compliant:	Yes
CARB Compliant:	Yes
Door Hinges:	Hinged To The Right By Default. For Wall Cabinets The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For This)
Toe Kicks Included w/Base Cabinets:	Yes
Side Panels Finished:	Yes
Installation/Design Note:	The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Ready-to-Assemble Cabinets

Pre-Assembled Cabinets

Outdoor Cabinetry

Pre-Assembled Custom Colors

Heather Grey Shaker

Aspen White Shaker

Artisan Champagne Shaker

Pewter Grey Shaker

Aspen White Shaker

Sky Blue Shaker

Natural Grey Shaker

Brazilian Shaker

Artisan Black Shaker

Artisan Oak Shaker

Artisan Walnut Shaker

Get Help

Thank you!