Milan White Matte

Width 30" | Height 30" | Depth 13"

2 door wall cabinet that has 2 adjustable shelves.

Width 30" | Height 30" | Depth 24"

1 door blind base corner cabinet with 1 drawer and (1) 18" deep shelf. The actual width is 30", but the cabinet must be pulled at least 6" from the corner, taking up 36" of wall space. It can be pulled a max of 9", taking up 39" of wall space. The door width is 8-7/8" and the blind opening width is 8-11/32". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 24"

1 full height door blind base corner cabinet with no drawers and (2) 18" deep shelves. The actual width is 30", but the cabinet must be pulled at least 6" from the corner, taking up 36" of wall space. It can be pulled a max of 9", taking up 39" of wall space. The door width is 8-7/8" and the blind opening width is 8-11/32". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 13"

Wall blind cabinet with 2 adjustable shelves. It can be installed right against the corner or pulled a maximum of 3" from the corner which would take up a total of 33" of wall space. Door width is 14-7/8" and the blind side has a fixed panel which is 14-15/16" wide. A filler must be used between the blind and the adjacent cabinet so the doors are able to open without interference. The filler must be purchased separately.

Width 30" | Height 30" | Depth 24"

2 full height door base cabinet with (2) 18" deep adjustable shelves. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. Please note that the shelves will not be included if roll outs are added to the cabinet.

Width 30" | Height 30" | Depth 24"

2 drawer base cabinet. Each drawer front measures 14-7/8" high. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-7/16" separately. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 21"

Vanity sink base cabinet with 2 full height doors and 2 shelves. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 24"

Base microwave cabinet with (1) 8-7/8" high drawer on bottom. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximum it can be cut is 28-1/2"W x 19-3/4"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). The height from the shelf to the top of the cabinet is 20-7/8". Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 21"

Microwave wall cabinet that has a 8-7/8" high lift-up door on top. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximumum it can be cut is 28-1/2"W x 19-3/4"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). *Design note: if wainscot panels are applied to the left and right of this cabinet, since they are 3/4" thick, they should also be appled to both sides of the range space, to keep the dimensions aligned. **Note this cabinet has a 21" depth**

Width 30" | Height 30" | Depth 24"

Base oven cabinet. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximum it can be cut is 28-1/2"W x 28-1/2"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 30" | Height 30" | Depth 21"

Farm sink base cabinet. Door heights are 17-7/8". Typically, the farm sink base should be a minimum of 3" wider than the farm sink (for example, a 30" farm sink would need a 33" farm sink base). The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximumum it can be cut is 28-1/2"W x 11-5/8"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 24"

Sink base cabinet with 2 doors and (1) 6-3/4" false drawer front. This cabinet will have no shelves (the sides will come pre-drilled with shelf clip holes if loose shelves are needed - which need to be purchased separately). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 21"

Vanity base cabinet with (2) doors, (1) drawer, and (1) 18" deep shelf. The drawer front is 6-3/4" high. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 21"

Vanity sink base cabinet with 2 doors and 1 false drawer front. Drawer front is 6-3/4" high. This cabinet will not have any shelves. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.