Vail White Shaker
Shipped in 5-15 business days
Accident Protection Warranty For Your Entire Kitchen! Learn More!
The Vail White Shaker collection features a classic shaker style with a stunning white paint that will brighten up any sized kitchen! You won't have to worry about compromising on the amenities with the Vail White Shaker collection where soft close hinges and drawer glides come standard! Its clean lines will match any decor and with a plywood box construction, you can rest easy that it will stand the test of time.
This finish is available in both Pre-Assembled and Ready to Assemble
| Shipping Time: |
Shipped in 5-15 business days |
| Style: | Shaker |
| Face Frame: | 3/4" x 1-1/2" Solid Birch |
| Door Frame: | 3/4" Solid Birch |
| Door Center: | MDF/HDF (to avoid cracking/warping, reversed raised door panel) |
| Door Frame Width: | 2.375" |
| Center Panel Beveled Edge: | No |
| Sides: | 1/2" A-Grade plywood with wood veneer |
| Top & Bottom (Wall): | 1/2" A-Grade plywood with wood veneer |
| Bottom (Base): | 3/8" A-Grade plywood with wood veneer |
| Back Panel: | 1/2" Full back |
| Shelves: | 3/4 " A-Grade plywood with wood veneer |
| Base Cabinet Shelf Depth: | 1/2 |
| Drawer Box: | Solid Wood 17mm (close to 3/4") sides, Drawer bottom 3/8" plywood, Drawer length 21". Dovetail construction, Natural finish. |
| Drawer Glides: | Undermount, full extension with soft closing feature |
| Base Corner Supports: | Metal corner brackets |
| Overlay: | Full with butt doors |
| Hinges: | Concealed 6-way adjustable with Soft Closing Feature |
| Cabinet Interior: | Natural Finish |
| Center Stile: |
No center stile on cabinetry 24"W to 36"W |
| Assembly Method: | L-bracket |
| Finish: | Polyurethane finish |
| Toe Kick: | 1/2" Plywood (sides of the toe kicks will be unfinished) |
| Installation Rail: | None (there is a full back) |
| Wall Cabinet Bottoms Finished (Exterior): | Yes |
| KCMA Compliant: | Yes |
| CARB Compliant: | Yes |
| Door Hinges: | Hinged To The Right By Default. For Wall Cabinets The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For This) |
| Toe Kicks Included w/Base Cabinets: | Yes |
| Sides Panels Finished: | Yes |
| Installation/Designer Note: |
The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. |
Login and Registration Form