Vienna Indigo

Width 96" | Height " | Depth "

Shaker crown molding that is reversible so can be installed two ways. When installed, it will be 3-1/4" high and will stick out from the cabinet 3-1/4".

Width 96"

Large crown molding, when installed, it will be 3-3/8" high and will stick out from the cabinet 3".

Width 96"

Small cove molding, when installed, it will be 2-1/8" high and will stick out from the cabinet 2-1/8".

Width 96"

Cove crown molding, when installed, it will be 2-1/2" high and will stick out from the cabinet 2-7/8".

Width 96"

Large cove crown molding. When installed, it will be 4-1/2" high and will stick out from the cabinet 4-1/2".

Width 96"

Extra large cove crown molding. When installed, it will be 5-1/2" high and will stick out from the cabinet 5-1/2".

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 96" | Height " | Depth .75"

Small batten molding.

Width 96" | Height " | Depth 1.25"

Large batten molding.

Width 96" | Height .25" | Depth .75"

Simple scribe molding.

Width 96" | Height 1.25" | Depth .375"

Decorative scribe molding. Flat front section is 3/4" high.

Width 96" | Height .75" | Depth .75"

Inside corner molding.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

Width 96" | Height 1.25" | Depth 1.25"

Outside corner molding. Inside height and depth is 7/8".

Width 96" | Height .75" | Depth .75"

Quarter round molding.

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height 5.25" | Depth .625"

Base board molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.

Width 96" | Height 6" | Depth .75"

Shiplap interlocking molding commonly used for walls, backsplash, or the backs of islands and peninsulas.

Width 96" | Height 4.5" | Depth .25"

Toe kick made of MDF.

Width 96" | Height 5.5" | Depth .75"

Straight valance.