Casselton Ivory

Width 96" |Height 24" |Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 96" | Height 36" | Depth .25"

Finished panel on both sides. Commonly used to finish the back of an island. Outside corner molding would be needed to finish the edges.

Width 96" | Height 36" | Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 96" | Height 48" | Depth .25"

Finished panel on both sides. Commonly used to finish the back of an island. Outside corner molding would be needed to finish the edges.

Width 96" |Height 48" |Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 96" | Height .75" | Depth .75"

Decorative inside corner molding.

Width 96" | Height .6875" | Depth "

Dentil molding insert to be used with the CCM8 Classic Crown Molding or CM8 Crown Molding.

Width 96" | Height 1.5" | Depth 2"

Light rail molding that is commonly used to hide lighting under wall cabinets.

Width 96" | Height 2" | Depth .75"

Mirror molding to be used to frame out a custom mirror. The mirrored glass would need to be purchased separetely.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Commonly used to finish edges on islands or other areas.

Width 96" | Height .75" | Depth .75"

Quarter round molding.

Width 96" | Height .75" | Depth .25"

Scribe molding which is commonly used to fill small gaps between cabinets and walls.

Width 96" | Height .75" | Depth .25"

Scribe molding with a double round edge.

Width 96" | Height .75" | Depth .34375"

Single bead insert molding with an 11/32" depth.

Width 96" | Height 4.5" | Depth .25"

Toe kick molding.

Width 96" | Height .75" | Depth .25"

Triple bead insert molding.

Width 96" | Height 3.25" | Depth "

Classic crown molding that will be 3-1/4" high once installed. Can be used with the DMI8 Dentil Molding or RMI8 Rope Molding inserts. Crown will have a 'heel' attached to the base to attach to the top of wall cabinets. If installing crown directly to the wall or the ceiling, the Classic Crown Molding (CM8) will work better since it does not have the 'heel'.

Width 96" | Height 2.5" | Depth "

Crown Molding that will be 2-1/2" high once installed.

Width 96" | Height 3.25" | Depth "

Crown molding that will be 3-1/4" high once installed. Can be used with the DMI8 Dentil Molding or RMI8 Rope Molding inserts. This crown will not have any 'heel' to attach the crown to the top of cabinetry, so it's better suited when attaching directly to the wall or ceiling. When being used on the top of wall cabinets, the Crown Molding (CCM8) will work better since it does have a 'heel' on the bottom of the crown.