Heritage Amber Shaker

Width 96" | Height 1-21/32" | Depth 1/4

Batten molding that comes in 8 ft long sections and is 1/4" thick.

Width 96" | Height 4-1/2" | Depth 11/16"

Decorative base molding that comes in 8 ft long sections and is 11/16" thick.

Width 96" | Height 36" | Depth 1/2"

Island panel that is 1/2" thick, grain runs left to right if the panel is on its side (making it 96" wide and 36" high). This panel comes finished on both sides.

Width 96" | Height 3-3/8"

Crown molding that comes in 8 ft long sections. When applying crown to full overlay cabinets, a crown backer will be required (block of wood that is installed to the top of the cabinet where the crown will be attached to). When installed, crown is 3-3/8"H and sticks out from the cabinet 2-1/2". There is a flat part to accommodate a rope insert (ROPE8) installation if desired.

Width 96" | Height 1" | Depth 1-7/16"

Light Rail Molding that is sold in 8 ft long sections.

Width 96" | Height 2-5/8"

Cove crown molding that comes in 8 ft long sections. When installed, the crown will stick out from the cabinet 2-1/2".

Width 96" | Height 13/16" | Depth 13/16"

Outside corner molding that is sold in 8 ft long sections. Each side is 3/4" thick.

Width 96" | Height 9/16" | Depth 1/4"

Rope insert for crown molding (LCM8) that comes in 8 ft long sections. There is a flat section on the crown to accommodate the rope insert installation. If it seems the rope insert will not attach properly, make sure the crown is not upside down.

Width 96" | Height 3/4" | Depth 1/4"

Shoe molding that can be trimmed to desired height and/or width.

Width 96" | Height 3/4" | Depth 1/4"

Scribe molding that comes in 8 ft long sections. It can be used behind light rail molding when wrapping around the side of a wall cabinet.

Width 96" | Height 4-1/2" | Depth 1/4"

Toe kick that comes in 8 ft long sections and can be cut to size if necessary.