Royal Oak

Royal Oak 33x84 Oven Cabinet - Out of stock through April
SKU# OU332484-RGO

Width 33" |Height 84" |Depth 24"

Oven cabinet with (2) 14-11/16" high doors on top and 3 drawers on bottom (top drawer front is 6-1/8" high and the middle and bottom drawer fronts are 11-1/8" high). The oven opening measures 30"W x 22-1/2"H, and the cabinet will come with (2) 1-1/2" fillers to be used if needed to create an opening width of 27". The stile above the opening is 6-3/8" high and the stile below the opening is 6-7/16" high. A double oven or oven/microwave combo can be accomodated by removing drawers, as needed.

$1,569.75

Qty

Shipping Time:	Ships in 3-10 business days
Style:	Raised
Face Frame:	3/4" x 1-1/2" plywood with Oak veneer
Door Frame:	3/4" plywood with Oak veneer
Door Center:	3/4" plywood with Oak veneer
Sides:	1/2" Plywood
Top & Bottom (Wall):	1/2" Plywood
Bottom (Base):	3/8"Plywood
Back Panel:	3 + 9 mm thick plywood sink base and vanity sink base cabinets will not have full backs, vanity sink bases with drawers will only have a full back behind the drawer section(s)
Shelves:	5/8" Plywood shelves, edge banded
Base Cabinet Shelf Depth:	10-1/2"
Drawer Box:	1/2" plywood front, back and sides, 3/8" drawer bottoms, screwed construction (plywood with oak veneer slab drawer front)
Drawer Glides:	Side mounted, epoxy coated, 3/4" extension
Base Corner Supports:	High impact, injection molded plastic
Overlay:	1/2 (partial)
Hinges:	Concealed hinges, 110 degree opening
Cabinet Interior:	Natural
Center Stiles:	Yes
Assembly Method:	Cam lock
Finish:	Polyurethane, UV resistant top coat with an oil based stain
Toe Kick:	1/2" Plywood
Installation Rail:	3/4" x 1-1/4" hardwood
Wall Cabinet Bottoms Finished (Exterior):	Yes
CARB Compliant:	Yes
Door Hinges:	Hinged right by default, base cabinet doors can be switched, but new holes may have to be drilled. Wall cabinet doors can be flipped.
Toe Kicks Included w/Base Cabinets:	Yes
Sides Panels Finished:	Yes
Installation/Designer Note:	The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Ready-to-Assemble Cabinets

Pre-Assembled Cabinets

Outdoor Cabinetry

Pre-Assembled Custom Colors

Royal Oak

Get Help

Thank you!