Rustic Shaker

Width 18" | Height 96" | Depth 24"

2 door (1 smaller door on top and 1 larger door on bottom) utility/pantry cabinet that comes with 4 adjustable shelves that can be used in either the top or bottom section. The bottom section is 54" high.

Width 23.25" | Height 96" | Depth .25"

Tall skin that is 1/4" thick and can be cut to size if necessary. *Please note actual width is 23-1/4"*

Width 23.25" | Height 96" | Depth .75"

Tall end panel to be used on the side of an 96" tall cabinet. The doors will come as 2 separate panels.

Width 24" | Height 96" | Depth -

Refrigerator end panel that has a 1/2" thick panel with a 1-1/2"W filler on the front. This refrigerator end panel can be trimmed to desired height and may be used either left or right. This panel comes finished on both sides, however it will have a natural finish, to achieve the knotty appearance, a skin must be purchased to apply to the side of the refrigerator panel. This can be done using the 'View Options' button, or by adding the Rustic Shaker 24x96 Tall Skin (HS-TS2496) under 'Skins and Panels' section under 'Cabinet Accessories'.

Width 24" | Height 96" | Depth 24"

4 door (2 smaller door on top and 2 larger door on bottom) utility/pantry cabinet that comes with 4 adjustable shelves that can be used in either the top or bottom section. The bottom section is 54" high.

Width 3" | Height 96" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width and has toe kick notch on bottom. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 96" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 96" | Depth .75"

Wall filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 96" | Depth .75"

Wall fluted filler that can be trimmed to desired height and has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 33" | Height 96" | Depth 24"

Universal oven cabinet that has a cut out opening that measures 28.5" W x 22" H and can be arranged as a single oven, double oven, or oven/microwave combination by removing the necessary drawers and cutting to fit. The cabinet has 2 doors on top and 3 drawers on bottom (2 standard size drawers on top and 1 deeper drawer below). The oven opening can be cut as wide as 30" and as high as 52-1/2" (by removing the top 1 or 2 drawers).

Width 36" | Height 96" | Depth .25"

1/4" thick stained panel. Grain runs up and down if the panel is stood up tall (making it 96" high and 36" wide). This panel comes finished on one side.

Width 42" | Height 96" | Depth .75"

Plywood edge banded panel that is trimmable, if needed. The grain (for stained collections) will run along the long side of the panel.

Width 48" | Height 96" | Depth 3/8"

Beadboard panel that can is trimmable, if needed. The grain (for stained collections) will run along the long side of the panel.

Width 6" | Height 96" | Depth .75"

Wall filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.