Stratton White Shaker

Stratton White Shaker 24x42 End Panel
SKU# SP24X42-ACW

Width 24" | Height 42" | Depth 1/4"

Finished end panel, typically used on the side of a pantry wall cabinet (can be cut to size, as needed).

$116.94

Qty
Stratton White Shaker 24x54 End Panel
SKU# SP24X54-ACW

Width 24" | Height 54" | Depth 1/4"

Finished end panel, typically used on the side of a pantry base cabinet.

$127.10

Qty
Stratton White Shaker 36x48 Island Panel
SKU# 3X4PAN-ACW

Width 36" | Height 48" | Depth .25"

Island panel.

$98.15

Qty

Shipping Time:	Ships in 3-10 business days
Style:	Shaker
Door Frame:	3/4" HDF
Door Center:	3/8" HDF
Door Frame Width:	2.5"
Center Panel Beveled Edge:	No, transition to center panel will be a straight, 90 transition
Sides:	1/2" Plywood
Top & Bottom (Wall):	1/2" Plywood
Bottom (Base):	3/8"Plywood
Back Panel:	1/2" Plywood sink base and vanity sink base cabinets will not have full backs, vanity sink bases with drawers will only have a full back behind the drawer section(s)
Shelves:	5/8" Plywood shelves, edge banded
Base Cabinet Shelf Depth:	10-1/2"
Drawer Box:	5/8" solid hardwood, 3/8" plywood bottom, dovetailed
Drawer Glides:	Full extension, undermount, soft-close glides
Base Corner Supports:	High impact, injection molded plastic
Overlay:	Full
Hinges:	6-way adjustable, soft-close, concealed hinges, 110 degree opening
Cabinet Interior:	Natural
Center Stile:	None unless otherwise noted
Assembly Method:	Cam lock
Finish:	Polyurethane, UV resistant paint, with a water-based coating
Toe Kick:	1/2" Plywood
Installation Rail:	3/4" x 1-1/4" hardwood
Wall Cabinet Bottoms Finished (Exterior):	Yes
CARB Compliant:	Yes
Door Hinges:	Hinged right by default, base cabinet doors can be switched, but new holes may have to be drilled. Wall cabinet doors can be flipped.
Toe Kicks Included w/Base Cabinets:	Yes
Sides Panels Finished:	Yes
Installation/Designer Note:	The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Ready-to-Assemble Cabinets

Pre-Assembled Cabinets

Outdoor Cabinetry

Pre-Assembled Custom Colors

Stratton Khaki Shaker

Stratton Light Grey Shaker

Stratton Dark Grey Shaker

Get Help

Thank you!