Milan Cafe

Width 30" | Height 30" | Depth 24"

2 full height door base cabinet with (2) 18" deep adjustable shelves. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. Please note that the shelves will not be included if roll outs are added to the cabinet.

Width 30" | Height 30" | Depth 24"

1 full height door blind base corner cabinet with no drawers and (2) 18" deep shelves. The actual width is 30", but the cabinet must be pulled at least 6" from the corner, taking up 36" of wall space. It can be pulled a max of 9", taking up 39" of wall space. The door width is 8-7/8" and the blind opening width is 8-11/32". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 24"

1 door blind base corner cabinet with 1 drawer and (1) 18" deep shelf. The actual width is 30", but the cabinet must be pulled at least 6" from the corner, taking up 36" of wall space. It can be pulled a max of 9", taking up 39" of wall space. The door width is 8-7/8" and the blind opening width is 8-11/32". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 24"

Base microwave cabinet with (1) 8-7/8" high drawer on bottom. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximum it can be cut is 28-1/2"W x 19-3/4"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). The height from the shelf to the top of the cabinet is 20-7/8". Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 24"

Base oven cabinet. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximum it can be cut is 28-1/2"W x 28-1/2"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 30" | Height 30" | Depth 24"

2 drawer base cabinet. Each drawer front measures 14-7/8" high. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-7/16" separately. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 79-1/2" | Depth 24"

Combo oven cabinet with two 11-7/8" high doors on top and two 11-7/16" high drawers on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 43-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 30" | Height 79-1/2" | Depth 24"

Double oven cabinet with two 11-7/8" high doors on top and one 11-7/16" high drawer on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 55"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 30" | Height 79-1/2" | Depth 24"

Single oven cabinet with two 11-7/8" high doors on top and three drawers on bottom. The top drawer front height is 6-3/4" and the middle and bottom drawer front heights are 11-7/16". The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 36-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 30" | Height 85-1/2" | Depth 24"

Combo oven cabinet with two 17-7/8" high doors on top and two 11-7/16" high drawers on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 43-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 85-1/2" height.

Width 30" | Height 85-1/2" | Depth 24"

Single oven cabinet with two 17-7/8" high doors on top and three drawers on bottom. The top drawer front height is 6-3/4" and the middle and bottom drawer front heights are 11-7/16". The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 36-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 85-1/2" height.

Width 30" | Height 91-1/2" | Depth 24"

Combo oven cabinet with two 23-7/8" high doors on top with one shelf, and two 11-7/16" high drawers on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 43-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 91-1/2" height.

Width 30" | Height 91-1/2" | Depth 24"

Double oven cabinet with two 23-7/8" high doors on top with one shelf, and one 11-7/16" high drawer on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 55"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 91-1/2" height.

Width 30" | Height 91-1/2" | Depth 24"

Single oven cabinet with two 23-7/8" high doors on top with one shelf, and three drawers on bottom. The top drawer front height is 6-3/4" and the middle and bottom drawer front heights are 11-7/16". The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 36-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 91-1/2" height.

Width 30" | Height 23-7/8" | Depth 24"

2 door range top base cabinet that comes with (1) adjustable shelf and a full top panel that will support the range that goes on top of the cabinet. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 30" | Height 23-7/8" | Depth 24"

2 drawer range top base cabinet that comes with (2) 11-7/8" high drawers (drawer front height) and a full top panel that will need to be cut on site to accommodate the range. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 30" | Height 30" | Depth 24"

Sink base cabinet with 2 doors and (1) 6-3/4" false drawer front. This cabinet will have no shelves (the sides will come pre-drilled with shelf clip holes if loose shelves are needed - which need to be purchased separately). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 79-1/2" | Depth 24"

Pantry cabinet that will have 4 doors; 2 shorter door on top and 2 taller door on bottom. The top doors are 29-7/8" high and the bottom doors are 49-13/32" high. There are 6 shelves that are 21" deep (shelves will be boxed separately from the pantry). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 30" | Height 85-1/2" | Depth 24"

Pantry cabinet that will have 4 doors; 2 shorter door on top and 2 taller door on bottom. The top doors are 35-7/8" high and the bottom doors are 49-13/32" high. There are 6 shelves that are 21" deep (shelves will be boxed separately from the pantry). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 85-1/2" height.

Width 30" | Height 91-1/2" | Depth 24"

Pantry cabinet that will have 4 doors; 2 shorter door on top and 2 taller door on bottom. The top doors are 41-7/8" high and the bottom doors are 49-13/32" high. There are 6 shelves that are 21" deep (shelves will be boxed separately from the pantry). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 91-1/2" height.

Width 30" | Height 12" | Depth 24"

2 door wall cabinet that has no shelves.

Width 30" | Height 18" | Depth 24"

2 door wall cabinet that has no shelves.

Width 30" | Height 24" | Depth 24"

2 door wall cabinet that has 1 shelf.