Milan Cafe

Width 30" | Height 30" | Depth 24"

2 full height door base cabinet with (2) 18" deep adjustable shelves. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. Please note that the shelves will not be included if roll outs are added to the cabinet.

Width 30" | Height 30" | Depth 24"

1 full height door blind base corner cabinet with no drawers and (2) 18" deep shelves. The actual width is 30", but the cabinet must be pulled at least 6" from the corner, taking up 36" of wall space. It can be pulled a max of 9", taking up 39" of wall space. The door width is 8-7/8" and the blind opening width is 8-11/32". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 24"

1 door blind base corner cabinet with 1 drawer and (1) 18" deep shelf. The actual width is 30", but the cabinet must be pulled at least 6" from the corner, taking up 36" of wall space. It can be pulled a max of 9", taking up 39" of wall space. The door width is 8-7/8" and the blind opening width is 8-11/32". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 24"

Base microwave cabinet with (1) 8-7/8" high drawer on bottom. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximum it can be cut is 28-1/2"W x 19-3/4"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). The height from the shelf to the top of the cabinet is 20-7/8". Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 24"

Base oven cabinet. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximum it can be cut is 28-1/2"W x 28-1/2"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 30" | Height 30" | Depth 24"

2 drawer base cabinet. Each drawer front measures 14-7/8" high. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-7/16" separately. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 2-1/2" | Depth 10"

Floating plywood shelf with a walnut finish that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).

Width 30" | Height 30" | Depth 21"

Farm sink base cabinet. Door heights are 17-7/8". Typically, the farm sink base should be a minimum of 3" wider than the farm sink (for example, a 30" farm sink would need a 33" farm sink base). The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximumum it can be cut is 28-1/2"W x 11-5/8"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 21"

Microwave wall cabinet that has a 8-7/8" high lift-up door on top. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximumum it can be cut is 28-1/2"W x 19-3/4"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). *Design note: if wainscot panels are applied to the left and right of this cabinet, since they are 3/4" thick, they should also be appled to both sides of the range space, to keep the dimensions aligned. **Note this cabinet has a 21" depth**

Width 30" | Height 36" | Depth 21"

Microwave wall cabinet that has (2) 14-7/8" high doors on top. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximum it can be cut is 28-1/2"W x 19-3/4"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). *Design note: if wainscot panels are applied to the left and right of this cabinet, since they are 3/4" thick, they should also be applied to both sides of the range space, to keep the dimensions aligned. **Note this cabinet has a 21" depth**

Width 30" | Height 42" | Depth 21"

Microwave wall cabinet that (2) 20-7/8" doors on top. The front panel is attached with clips for easy removal and install. Once removed, the opening will need to be cut, the maximum it can be cut is 28-1/2"W x 19-3/4"H, then the panel will be reattached back onto the cabinet. To avoid damage to the frame and side panels, please apply extra care when cutting the front panel, blue masking tape is the most commonly used to avoid splintering (strong adhesives must be avoided to avoid pulling the finish off). *Design note: if wainscot panels are applied to the left and right of this cabinet, since they are 3/4" thick, they should also be applied to both sides of the range space, to keep the dimensions aligned. **Note this cabinet has a 21" depth**

Width 30" | Height 79-1/2" | Depth 24"

Combo oven cabinet with two 11-7/8" high doors on top and two 11-7/16" high drawers on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 43-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 30" | Height 79-1/2" | Depth 24"

Double oven cabinet with two 11-7/8" high doors on top and one 11-7/16" high drawer on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 55"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 30" | Height 79-1/2" | Depth 24"

Single oven cabinet with two 11-7/8" high doors on top and three drawers on bottom. The top drawer front height is 6-3/4" and the middle and bottom drawer front heights are 11-7/16". The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 36-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 30" | Height 85-1/2" | Depth 24"

Combo oven cabinet with two 17-7/8" high doors on top and two 11-7/16" high drawers on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 43-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 85-1/2" height.

Width 30" | Height 85-1/2" | Depth 24"

Single oven cabinet with two 17-7/8" high doors on top and three drawers on bottom. The top drawer front height is 6-3/4" and the middle and bottom drawer front heights are 11-7/16". The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 36-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 85-1/2" height.

Width 30" | Height 91-1/2" | Depth 24"

Combo oven cabinet with two 23-7/8" high doors on top with one shelf, and two 11-7/16" high drawers on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 43-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 91-1/2" height.

Width 30" | Height 91-1/2" | Depth 24"

Double oven cabinet with two 23-7/8" high doors on top with one shelf, and one 11-7/16" high drawer on bottom (height is drawer front height). The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 55"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 91-1/2" height.

Width 30" | Height 91-1/2" | Depth 24"

Single oven cabinet with two 23-7/8" high doors on top with one shelf, and three drawers on bottom. The top drawer front height is 6-3/4" and the middle and bottom drawer front heights are 11-7/16". The oven cabinet has a full panel that will need to be cut on site, the maximum cutout is 28"W x 36-3/4"H. When using two appliances, it is recommended to provide support for the top appliance; PLY-3/4 can be used and would need to be purchased separately, and then installed on site. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 91-1/2" height.

Width 30" | Height 96" | Depth 3"

Refrigerator end panel that is finished on both sides and edgebanded on all edges. The panel has a 3" filler attached to the front which will be flush with the sides.

Width 30" | Height 96" | Depth 3/4"

Refrigerator end panel that is finished on both sides and edgebanded on all edges.

Width 30" | Height 23-7/8" | Depth 24"

2 door range top base cabinet that comes with (1) adjustable shelf and a full top panel that will support the range that goes on top of the cabinet. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 30" | Height 23-7/8" | Depth 24"

2 drawer range top base cabinet that comes with (2) 11-7/8" high drawers (drawer front height) and a full top panel that will need to be cut on site to accommodate the range. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height. *A heat shield will need to be used on both sides of an oven base cabinet or range-top base cabinet to shield the adjacent cabinet boxes from the oven heat. This can be added from the 'View Options' area for this cabinet. Each heat shield will be 30" high and can be cut to size, as needed (sold in quantities of 1, a quantity of 2 must be ordered to receive 2 heat shields).*

Width 30" | Height 30" | Depth 24"

Sink base cabinet with 2 doors and (1) 6-3/4" false drawer front. This cabinet will have no shelves (the sides will come pre-drilled with shelf clip holes if loose shelves are needed - which need to be purchased separately). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 79-1/2" | Depth 13"

Pantry cabinet that will have 4 doors; 2 shorter door on top and 2 taller door on bottom. The top doors are 29-7/8" high and the bottom doors are 49-13/32" high. There are 5 shelves that are 12" deep (shelves will be boxed separately from the pantry). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 30" | Height 85-1/2" | Depth 13"

Pantry cabinet that will have 4 doors; 2 shorter door on top and 2 taller door on bottom. The top doors are 35-7/8" high and the bottom doors are 49-13/32" high. There are 5 shelves that are 12" deep (shelves will be boxed separately from the pantry). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 85-1/2" height.

Width 30" | Height 91-1/2" | Depth 13"

Pantry cabinet that will have 4 doors; 2 shorter door on top and 2 taller door on bottom. The top doors are 41-7/8" high and the bottom doors are 49-13/32" high. There are 6 shelves that are 21" deep (shelves will be boxed separately from the pantry). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 91-1/2" height.

Width 30" | Height 79-1/2" | Depth 24"

Pantry cabinet that will have 4 doors; 2 shorter door on top and 2 taller door on bottom. The top doors are 29-7/8" high and the bottom doors are 49-13/32" high. There are 6 shelves that are 21" deep (shelves will be boxed separately from the pantry). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 79-1/2" height.

Width 30" | Height 85-1/2" | Depth 24"

Pantry cabinet that will have 4 doors; 2 shorter door on top and 2 taller door on bottom. The top doors are 35-7/8" high and the bottom doors are 49-13/32" high. There are 6 shelves that are 21" deep (shelves will be boxed separately from the pantry). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 85-1/2" height.

Width 30" | Height 91-1/2" | Depth 24"

Pantry cabinet that will have 4 doors; 2 shorter door on top and 2 taller door on bottom. The top doors are 41-7/8" high and the bottom doors are 49-13/32" high. There are 6 shelves that are 21" deep (shelves will be boxed separately from the pantry). Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 91-1/2" height.

Width 30" | Height 30" | Depth 21"

Vanity base cabinet with (2) doors, (1) drawer, and (1) 18" deep shelf. The drawer front is 6-3/4" high. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 21"

Vanity sink base cabinet with 2 full height doors and 2 shelves. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 30" | Depth 21"

Vanity sink base cabinet with 2 doors and 1 false drawer front. Drawer front is 6-3/4" high. This cabinet will not have any shelves. Black, adjustable, plastic furniture feet will also be included which will add 3-3/4" to 5-3/8" to the 30" height.

Width 30" | Height 12" | Depth 24"

2 door wall cabinet that has no shelves.

Width 30" | Height 12" | Depth 13"

2 door wall cabinet that has no shelves.

Width 30" | Height 15" | Depth 13"

2 door wall cabinet that has no shelves.

Width 30" | Height 15" | Depth 13"

Lift-up door wall cabinet that will not have any shelves.

Width 30" | Height 18" | Depth 24"

2 door wall cabinet that has no shelves.

Width 30" | Height 18" | Depth 13"

2 door wall cabinet that has no shelves.

Width 30" | Height 18" | Depth 13"

Lift-up door wall cabinet that will not have any shelves.

Width 30" | Height 24" | Depth 24"

2 door wall cabinet that has 1 shelf.

Width 30" | Height 24" | Depth 13"

2 door wall cabinet that has 1 shelf.

Width 30" | Height 30" | Depth 13"

2 door wall cabinet that has 2 adjustable shelves.

Width 30" | Height 36" | Depth 13"

2 door wall cabinet that has 2 adjustable shelves.

Width 30" | Height 42" | Depth 13"

2 door wall cabinet that has 3 adjustable shelves.

Width 30" | Height 18" | Depth 13"

Wall appliance cabinet that is meant to sit on the countertop to hide appliances, it will have an open floor and no bottom rail. It features Blum Lift-Up & Away Hinges to allow the door to lift up and away from the face frame of the cabinet. It will be shipped with a support bracket to be removed before cabinet installation.

Width 30" | Height 30" | Depth 13"

Wall blind cabinet with 2 adjustable shelves. It can be installed right against the corner or pulled a maximum of 3" from the corner which would take up a total of 33" of wall space. Door width is 14-7/8" and the blind side has a fixed panel which is 14-15/16" wide. A filler must be used between the blind and the adjacent cabinet so the doors are able to open without interference. The filler must be purchased separately.

Width 30" | Height 36" | Depth 13"

Wall blind cabinet with 2 adjustable shelves. It can be installed right against the corner or pulled a maximum of 3" from the corner which would take up a total of 33" of wall space. Door width is 14-7/8" and the blind side has a fixed panel which is 14-15/16" wide. A filler must be used between the blind and the adjacent cabinet so the doors are able to open without interference. The filler must be purchased separately.

Width 30" | Height 42" | Depth 13"

Wall blind cabinet with 3 adjustable shelves. It can be installed right against the corner or pulled a maximum of 3" from the corner which would take up a total of 33" of wall space. Door width is 14-7/8" and the blind side has a fixed panel which is 14-15/16" wide. A filler must be used between the blind and the adjacent cabinet so the doors are able to open without interference. The filler must be purchased separately.

Width 30" | Height 18" | Depth 13"

Wine rack cabinet with a finished interior that can be installed horizontally or vertically. Cubes measure 4-1/8"W x 5"H and fit 18 bottles.